- Oct 22, 2017 -
Do the light of the stage lamp design this key link, you enough professional?
To do a good job of professional stage lights configuration, we must first understand the stage light commonly used light. This is an important part of the proper selection of configuration.
1, surface light: from the top of the audience to the front of the stage to the light, the main role for the character front lighting and the whole basic light patch.
2, slap in the mouth: located on both sides of the mouth, oblique cast in the stage of light, divided into upper and lower layers, the main auxiliary surface light, strengthen the facial lighting, increase the characters,
3, column light (also known as side light): from both sides of the mouth of the projection of light, mainly for people or scenery on both sides of the lighting, increase the sense of three-dimensional, contours.
4, the top light: from the stage above the stage to the light, from front to back into a row of top light, two rows of top light, three rows of top light ... ... and so on, mainly for the stage of general lighting, enhance the stage illumination, and A lot of scenery, props of fixed-point irradiation, mainly by the top light to solve.
5, backlight: from the stage in the reverse direction of the projection of light (such as the top light, bridge light and other reverse exposure), can be sketched out the characters, King said the outline, enhance the sense of three-dimensional and transparent, but also as a specific light source.
6, bridge light: on both sides of the stage at the bridge to the stage of the light, mainly for the auxiliary column light, enhance the three-dimensional, but also for other light inconvenience projection position, but also as a specific light source.
7, foot: from the Taiwan side of the bench to the stage projection of the light, the main auxiliary surface lighting and eliminate the high light due to the face of the face and the formation of the shadow of the jaw.
8, heaven and earth light: from the top of the sky and below the sky to the light, mainly for the curtain of lighting and color changes.
9, the flow of light: located on both sides of the stage on the flow lighthouse, the main auxiliary bridge light, add the stage on both sides of the light or other specific light.
10, chasing light: from the audience or other locations need to use the light bit, mainly used to track the actors or highlight a particular light, but also for the host, is the stage art close-up, play the finishing touch.
【Common lamps and features】
1, spotlight: stage lighting is the most widely used one of the main light, the current market 1KW, 2KW, to the most widely used 2KW It illuminates the light concentration, the edge of the contour is more clear, can highlight a local, can also enlarge the spot lighting a region, as the main stage of the light source, commonly used in light, slap in the face, side light and other light.
2, soft light: soft and symmetrical, both to highlight a certain part, and no blunt light spot, easy to connect a few lights, the common are 0.3KW, 1KW, 2KW and so on. Used for column light, flow light and other close light.
3, back to light: it is a reflection of the lamp, which is characterized by light hard, high illumination and long range, is a both economic and efficient light, common mainly 0.5KW, 1KW, 2KW, etc., to use the most 2KW.
4, astigmatism: light diffuse, are said, the projection area is large, divided into astigmatism and astigmatism, common 0.5KW, 1KW, 1.25KW, 2KW, etc., for the curtain, can also be used for the theater Taiwan's general lighting.
5, modeling lights: principle between the chase light and spotlight, is a special lighting, mainly for the characters and scenery modeling projection.
6, foot light (also known as lights): soft light, a wide area. Mainly as to the King, Net King cloth light, cloth color, but also in the mouth position assisted surface lighting.
7, light beam (also known as downlight): the current use of a more extensive, such as PAR46, PAR64 and other models. Can be used for people and the scene of the various lighting, can also be installed directly on the stage, exposed to the audience, the formation of light array, for the stage decoration and lighting dual role.
8, cast slides and sky effect lights: the stage can be formed on the whole screen, and a variety of special effects, such as: wind, rain, mine, electricity, water, fire, smoke, clouds and so on.
9, computer lights: This is a DMX512 or RS232 or PMX signal control of intelligent lighting, the light color, light, illumination are better than the above conventional lamps developed in recent years, an intelligent lighting, often installed in the surface light, Top light, the stage after the stage and other positions, the operation of the color, shape, plans, etc. can be programmed to run the program. Due to the different power size, the use of the stage to be different. General low-power computer lights, only suitable for the use of the ballroom, low-power computer lights on the stage, the spot is often the stage spotlight, back light and so on, so in the selection to pay special attention.
10, chasing light: the stage lighting fixtures, characterized by high brightness, the use of lens imaging, can show a clear spot, by adjusting the focal length, but also change the spot virtual reality. There are activities Guanglan, you can easily change the color, the lamp body can run freely and so on. At present, there are many varieties of market, labeling methods are not the same, the power as the standard such as: 1KW halogen tungsten light source, 1KW dysprosium light source, 1KW metal halide light source, 2KW metal halide light source, but also to the distance as the standard chasing light Light (light intensity at a certain distance, illumination), such as 8-10m chasing light, 15-30m chasing light, 30-50m chasing light, 50-80m chasing light, etc., and in function is divided into: Mechanical tracking light, the focus, light bar, color are finished manually; the other for the computer chasing light, the focus, light bar, color, adjust the color temperature are automatically pushed through the push and electrical appliances, so in Selection must be carefully selected for a variety of indicators.